Difference between revisions of "ID-RP2C"

From K2CC Wiki
(Programming)
Line 1: Line 1:
 
[[Category:SPEED Radio]]
 
[[Category:SPEED Radio]]
 +
[[File:ID-RP2C.PNG|frame|ID-RP2C Settings as of 1/26/18]]
  
 
The Icom ID-RP2C is the repeater controller for the D-Star System. It supports 4 Repeater modules, and 2 microwave links, plus the addition of a Gateway Server.
 
The Icom ID-RP2C is the repeater controller for the D-Star System. It supports 4 Repeater modules, and 2 microwave links, plus the addition of a Gateway Server.
Line 16: Line 17:
 
IP Address: 172.16.0.1<br>
 
IP Address: 172.16.0.1<br>
 
UDP Port #: 20319<br>
 
UDP Port #: 20319<br>
Password  : <<Default K2CC Password>><br>
+
Password  : a2mRingo<br>
 
<br>
 
<br>
 
The Repeater is configured in D:V:V:V mode. The controller expects the gateway to be at 172.16.0.20.
 
The Repeater is configured in D:V:V:V mode. The controller expects the gateway to be at 172.16.0.20.

Revision as of 17:20, 26 January 2018

ID-RP2C Settings as of 1/26/18

The Icom ID-RP2C is the repeater controller for the D-Star System. It supports 4 Repeater modules, and 2 microwave links, plus the addition of a Gateway Server.

Connections

The repeater controller acts as a distribution for the other Icom repeater modules. Each repeater module connects to the Power Connectors on the rear of the RP2C.
The four RJ-45 style jacks on the rear of the RP2C are for connecting to the local repeater modules. connection from left to right:
Port 1:DD-A ID-RP2D
Port 2:DV-C Not Used
Port 3:DV-B ID-RP4000V
Port 4:DV-A ID-RP2V

Programming

The repeater controller is programmed by connecting a computer to the 10 Base-T port. On the computer, run the Utility for ID-RP2C.
Login info:
IP Address: 172.16.0.1
UDP Port #: 20319
Password : a2mRingo

The Repeater is configured in D:V:V:V mode. The controller expects the gateway to be at 172.16.0.20.