Before using D-STAR, you will need to register your callsign on the network. Instructions on how to do this can be found here.
Below is a list of supported D-Star gateway commands. A _ represents a space.
|D-Star Gateway Commands|
|To work a station on the local repeater||CQCQCQ _ _||K2CC _ _ _ A||K2CC _ _ _ A||Not routed to a reflector, even if linked.|
|To work a station on the currently linked reflector||CQCQCQ _ _||K2CC _ _ _ A||K2CC _ _ _ G|
|To callsign route to a particular user||KC2YXU _ _||K2CC _ _ _ A||K2CC _ _ _ G||To callsign route to KC2YXU, wherever they are.|
|To route to a particular repeater||/GB7ZZ _ B||K2CC _ _ _ A||K2CC _ _ _ G||To route to the repeater GB7ZZ B|
|Link to a reflector||REF001CL||K2CC _ _ _ A||K2CC _ _ _ G||Links to reflector REF001C|
|Unlink from a reflector||_ _ _ _ _ _ _ U||K2CC _ _ _ A||K2CC _ _ _ G|
|To echo your transmission back to you||_ _ _ _ _ _ _ E||K2CC _ _ _ A||K2CC _ _ _ G||Useful for testing your radio setup. Limited to 60s.|
|To trigger a voice announcement of the link status||_ _ _ _ _ _ _ I||K2CC _ _ _ A||K2CC _ _ _ G|